Item # C-SPW2226-407N1, Sealed Spherical Pillow Blocks, Ductile End Cover, Open End, SPW Type On Bearing Distributors, Inc.

Skip to Content

All Categories > All Products > Bearings > Mounted Units > Heavy Duty Mounted Units > Sealed Spherical Pillow Blocks, Ductile End Cover, Open End, SPAW/SPW Type > Item # C-SPW2226-407N1

Request Quote

Unit of Measure

Technical Specifications | Guidelines for Mounting | Shaft Tolerance | Allowable Loads | Dimensional Specifications

Technical Specifications

Type	N/A Pillow Block Unit
Bearing Type	N/A Spherical Roller Bearing
Seal Material	N/A Nitrile Rubber
Locking Device	N/A Adapter
Bearing Number	N/A MX-W22226EALLKW33C3
Housing Number	N/A SP226N1
Adapter Sleeve Number	N/A HA2326M1
Housing Material	N/A Ductile Iron
Housing Construction	N/A 1 Piece
Mounting Type	N/A 2-Bolt
Performance	N/A Heavy Duty
End Type	N/A (2) Open
Dynamic Load Rating	N/A 182000 lbf808000 N808.00 kN
Static Load Rating	N/A 202000 lbf898000 N898.00 kN
Rotational Speed [Max]	N/A 1200 rpm
Operating Temperature Range	N/A -40 to 400 ºF-40 to 200 ºC
Lubrication	N/A Relubricatable

Guidelines for Mounting

Axial Displacement - Min.	N/A 0.043 in
Axial Displacement - Max.	N/A 0.055 in
Recommended Locknut Rotation	N/A 210 º
Hydraulic Pressure - Min.	N/A 3250 lb/in²
Hydraulic Pressure - Max.	N/A 4500 lb/in²

Shaft Tolerance

Shaft Tolerance

nominal to .-003 innominal to -87 µm

Allowable Loads

Loading zoom Housing Allowable Loads
Allowable Loads - P60	N/A 77000 lb
Allowable Loads - P90	N/A 48500 lb
Allowable Loads - P120	N/A 26500 lb
Allowable Loads - P150	N/A 24000 lb
Allowable Loads - P180	N/A 26500 lb

Dimensional Specifications

Loading zoom Sealed Spherical Pillow Blocks, Cast Dust Cover, Open End, SPAW/SPW Type - Dimensions
d	N/A 4.4375 in112.713 mm
h	N/A 5.9055 in150.0 mm
a	N/A 17.5197 in445.0 mm
b	N/A 4.5276 in115.0 mm
b1	N/A 5.1181 in130.0 mm
c	N/A 1.9685 in50.0 mm
l	N/A 8.6220 in219.000 mm
m	N/A 14.9606 in380.0 mm
w	N/A 11.5354 in293.0 mm
u	N/A 1.1024 in28.0 mm
v	N/A 1.4173 in36.0 mm
Notes	N/A Sales drawing reflects "Bore Size w/o Adapter". They do not show the "d"dimension, which is the bore size with adapter